SEH Exception
Posted: Mon Sep 30, 2019 7:30 pm
Hi,
sometimes the screensaver crashes with following message in logs.
30-9-2019 20:18:40 : OnTimer: Exit
30-9-2019 20:18:57 : OnTimer: gPhotoShow is not the foreground application
30-9-2019 20:18:57 : OnTimer: Enter (WaitDX=0)
30-9-2019 20:18:57 : ChangeBitmapFromTimer: Enter m_BmpChgStep=1, main=1
30-9-2019 20:18:57 : ChooseImageFile(0),0
30-9-2019 20:18:57 : RandomInFolder(1,0): Selected 0 (first=-1,last=-1)
30-9-2019 20:18:57 : ChooseImageFile: List Size 1, Selected 0 (C:\Users\...\image1.jpg)
30-9-2019 20:18:57 : ChooseImageFile: Added image to back list C:\Users\...\image1.jpg
30-9-2019 20:18:57 : AdjustIndexes: ni=0 (first=0,last=0)
30-9-2019 20:18:57 : >>> SEH Exception
30-9-2019 20:18:57 : >>> LoadNewBitmap: SEH Exception c0000094, maybe the file loaded is corrupted or in unsupported format
30-9-2019 20:18:57 : ChangeBitmap: LoadNewImage er=-1
30-9-2019 20:18:57 : ChooseImageFile(0),0
30-9-2019 20:18:57 : CheckEmptyFileList: Img List Empty
30-9-2019 20:18:57 : RestartList
I read in other posts that this might be because the loaded Image is missing EXIF information. However if that were true, it should always crash when loading the specific image. But most of the time, the image is loaded and displayed without problems.
sometimes the screensaver crashes with following message in logs.
30-9-2019 20:18:40 : OnTimer: Exit
30-9-2019 20:18:57 : OnTimer: gPhotoShow is not the foreground application
30-9-2019 20:18:57 : OnTimer: Enter (WaitDX=0)
30-9-2019 20:18:57 : ChangeBitmapFromTimer: Enter m_BmpChgStep=1, main=1
30-9-2019 20:18:57 : ChooseImageFile(0),0
30-9-2019 20:18:57 : RandomInFolder(1,0): Selected 0 (first=-1,last=-1)
30-9-2019 20:18:57 : ChooseImageFile: List Size 1, Selected 0 (C:\Users\...\image1.jpg)
30-9-2019 20:18:57 : ChooseImageFile: Added image to back list C:\Users\...\image1.jpg
30-9-2019 20:18:57 : AdjustIndexes: ni=0 (first=0,last=0)
30-9-2019 20:18:57 : >>> SEH Exception
30-9-2019 20:18:57 : >>> LoadNewBitmap: SEH Exception c0000094, maybe the file loaded is corrupted or in unsupported format
30-9-2019 20:18:57 : ChangeBitmap: LoadNewImage er=-1
30-9-2019 20:18:57 : ChooseImageFile(0),0
30-9-2019 20:18:57 : CheckEmptyFileList: Img List Empty
30-9-2019 20:18:57 : RestartList
I read in other posts that this might be because the loaded Image is missing EXIF information. However if that were true, it should always crash when loading the specific image. But most of the time, the image is loaded and displayed without problems.