Command Line Switches ?
Posted: Fri Feb 06, 2015 3:01 am
Several years ago I wrote some scripts that called gPhotoShow. In looking at the command line switches I used there is one that I can now find no documentation on, namely "/w:".
I figured out what the 1st 4 csv numbers after the switch are for, but not the last one (yet).
I'm wondering if there's a central location that documents all command line switches/parameters?
I found documentation on the /c, /s, /f, /r switches in the help file under "Slide Show Maker" and on the /m and /q switches under "FAQ".
But oddly, I found nothing on /w. Now I'm wondering where I got it from and if there are other non-documented switches?
I figured out what the 1st 4 csv numbers after the switch are for, but not the last one (yet).
I'm wondering if there's a central location that documents all command line switches/parameters?
I found documentation on the /c, /s, /f, /r switches in the help file under "Slide Show Maker" and on the /m and /q switches under "FAQ".
But oddly, I found nothing on /w. Now I'm wondering where I got it from and if there are other non-documented switches?